Need help?Do you have a question about the BRINKS BHS-2000 and is the answer not in the manual?
General| Backup Battery | Yes |
|---|---|
| Wireless | Yes |
| Wireless Frequency | 433MHz |
| Power Source | AC adapter |
| Compatibility | Brinks Security Sensors |
Details components of the standard Brink's Home Security system.
Device designed to detect smoke and dangerously high heat.
Special code to send a silent message to the monitoring center.
Notifies if the telephone line is cut by sounding the siren.
System is on, interior/exterior sensors active, with entry/exit delays.
Doors to be used most frequently for entering and exiting the home.
Steps to arm the system using the normal operating mode.
Explains the 'NOT READY' status and how to resolve it before arming.
Procedure to disarm the system using a valid three-digit code.
Steps to cancel an active alarm and notify the monitoring center of a false alarm.
How to disarm the system and check alarm memory after an event.
Instructions on actions to take during a real emergency situation.
How to arm the system while disabling motion detectors.
How to arm the system, making all doors instant without delay.
How to arm the system disabling motion detectors and making doors instant.
Allows bypassing a trouble zone or specific zone from system protection.
Activates a chime alert when a protected door or window is opened.
Procedure to add extra user codes for system access.
Procedure to remove existing auxiliary user codes from the system.
Allows reviewing past alarm events and their zone numbers.
Tests the system's communication with the monitoring center and siren function.
Verifies the functionality of door and window sensors without sending signals.
Tests the motion detector's ability to detect movement.
Instructions for testing the smoke detector's functionality.
Indicates the system is running on backup battery due to loss of AC power.
Alerts to a low battery status and the need for replacement or service.
Indicates a problem with the smoke/heat detector zone.
Notifies when the telephone line has been cut or interrupted.
Indicates the system cannot communicate with the monitoring center.
Clarifies customer responsibility for false alarm fines.
Provides guidance on preventing false alarms.
Advises on sharing access codes securely.
Recommends the frequency for system testing.
Confirms the need to clean smoke/heat detectors.
Explains system functionality during power outages and battery backup.
Guides on selecting appropriate emergency contacts.
Advises on communicating with emergency contacts.
Addresses system behavior and options if phone lines are interrupted.
Advises checking local requirements for alarm permits.
Discusses potential insurance discounts for security systems.
Informs about referral incentives for new customers.
Explains the process for receiving credit for referrals.
Outlines potential taxes applicable to the security system.
To Next Page