Brinly PolyVAC System LVS-33 BH

To Next Page

L-1771-D

OWNER'S MANUAL

For the latest product updates and setup tips:

Visit us on the web!

www.brinly.com

Important: This manual contains information for the safety of

persons and property. Read it carefully before assembly and

operation of the equipment!

Congratulations on your purchase! Your Lawn-Vac will require significant assembly time. Depending

on your skills; you should plan on 4 to 8 hours for assembly. Please call us at 877-728-8224 if you have

questions regarding the assembly or operation of your Lawn-Vac.

Note: Warranty registration required! Please make sure you send in the warranty card with required

information and record the serial numbers below.

Serial Number:

Engine Number:

MODEL:

LVS-33 BH

LVS-33 BHK

Assembly

Installation

Operation

Repair Parts

For use with

Lawn/Garden Tractors

LVS-33BH PolyVAC System fits the following

mower deck sizes of current tractor models:

PolyVAC System

• John Deere 42'', 48'' & 54'' • MTD 38'', 42'' & 46''

• Murray 40'', 42'' & 46'' • Troy-Bilt 42'', 42''

• Craftsman 42'', 46",48'' & 50'' • Bolens 38'' & 42''

• Cub Cadet 38'', 42'' 44''50" • Stanley 42'' & 46''

• Husqvarna 46'', 48" & 54"

• John Deere ''X'' Series - 42'', 48'' , 54'' & 62''

NOT recommended for zero turn Radius (ZTR) mowers.

Main Page

Need help?

Do you have a question about the Brinly PolyVAC System LVS-33 BH and is the answer not in the manual?

Summary

Safety Guidelines

Rules for Safe Operation

Essential rules for safe operation, covering user conduct and equipment precautions.

Tractor Preparation

Mower Deck Opening Preparation

Instructions for marking and cutting the mower deck opening to ensure proper fit of the housing.

Mower Deck Bracket Selection

Guidance on choosing the correct mower deck bracket based on tractor model and deck width.

Mower Deck Housing Mounting Options 1 & 2

Instructions for attaching the housing using options 1 and 2, for specific mower deck opening heights.

Mower Deck Housing Mounting Options 3 & 4

Instructions for attaching the housing using options 3 and 4, for different mower deck opening heights.