STEP 6. Finish
While recording, hold the “OK” button until the LCD light turns on and shows the text “Processing”, it means the
camera is processing file closing. When completed the processing it will display the text “Ready”.
This indicates the recording session is complete.
Remove the SD card from the camera, and insert it into your computer or laptop to enjoy your amazing Time Lapse
Videos!
Optional Accessory
Brinno Reader (ABR100)
Play your construction time lapse video on your smartphone on site.
No need to go back to the office with the Brinno High Speed On The Go ( OTG ) Reader (ABR100) *Your
Smartphone needs to OTG for this function.
Motion Sensor (ATM100)
To Next Page
Loading...
