Need help?Do you have a question about the Brinno TLC120 and is the answer not in the manual?
General| Model | TLC120 |
|---|---|
| Brand | Brinno |
| Category | Digital Camera |
| Type | Time Lapse Camera |
| Resolution | 1280 x 720 |
| Sensor Type | CMOS |
| Interval Range | 1 second to 24 hours |
| Video Format | AVI |
| Waterproof | No |
| Storage | SD card (up to 32 GB supported) |
| Power Source | AA batteries |
| Lens | Fixed Focus |
| Operating Temperature | -10°C to 50°C |
Install the Brinno Camera APP on your smartphone for camera control.
Identifies all physical components of the Time Lapse Camera TLC120.
Instructions on inserting the SD card and recommended sizes.
Guide to charging the camera battery, including LED indicators.
Steps to power on the camera and set the date and time.
Steps to connect the camera to your smartphone via the Brinno APP.
Explanation of the camera's live preview interface and its elements.
Overview of the camera's main menu and available settings options.
How to start recording a time lapse video using the Brinno Camera App.
Instructions on how to stop and save a time lapse recording.
Procedure for starting and stopping time lapse recording without the mobile app.
Steps to access and play recorded time lapse videos from the camera.
How to share recorded videos via social media and other platforms.
Instructions for converting and saving videos to your mobile device.
Guide on how to delete recorded videos from the camera storage.
Adjust camera settings based on different lighting conditions like Daylight, Night, or Star.
Set the time interval between captured frames for time lapse videos.
Adjust the frames per second (FPS) for video playback speed.
Adjust the exposure level for optimal brightness in your recordings.
Set image quality, affecting compression, storage, and photo count.
Adjust High Dynamic Range for better detail in challenging lighting.
Set white balance for accurate color representation under various lighting.
Customize image parameters like saturation, contrast, and sharpness.
Option to display or hide the time stamp on the video.
Set a pre-defined recording period for automated camera operation.
Enable or disable camera recording in low light environments.
Control whether the LED indicator flashes during frame capture.
Select fluorescent lighting frequency to match indoor lighting.
Access general settings, Wi-Fi modes, and reset options.
Safety precautions for battery, FCC compliance, and RF exposure limits.
To Next Page
