Brino BCS 24-70 User Manual

a. Rotate lens upwards, then place the IR lter horizontally. b. Screw in IR lter
with ngers. c. Insert the screwdriver* from TLC200 Pro into one of the driving
holes, turn clockwise until tight.
* For more information, please refer to the TLC200 Pro manual page 5(Package Content).
a. Turn TLC200 Pro face down to the oor to protect against dust getting on
the sensor.
b. Rotate counter-clockwise to unlock the BCS 019.
Store with the
lens covers to
protect the lens.
Glass
Driving Holes
IR Filter
Top cover
Bottom cover Aperture
Focus
Zoom
BCS 24-70
User Manual
24-70mm F1.4
Brinno Lens
1. Package contents
Brinno Lens 24-70 mm F1.4 (BCS 24-70) x 1
Lens Bag x 1
IR Filter x 1
IR Filter case x 1
User manual x 1
2. Parts of device
Brinno Lens
3. Installation
3-2 To install IR Filter on TLC200 Pro
3-1 To remove the current lens kit(BCS 019) from TLC200 Pro
IR Filter works with BCS 019, BCS 18-55 and BCS 24-70. It’s recommended to
keep IR Filter on TLC200 Pro.
a.
a. b.
b.
c.
5

Brino BCS 24-70 Specifications

General

Brand	Brino
Model	BCS 24-70
Category	Lenses
Language	English

Summary

Package Contents

Device Components

Top Cover

Identifies the top cover of the device.

Bottom Cover

Identifies the bottom cover of the device.

Zoom Control

Details the zoom function of the lens.

Aperture Control

Details the aperture function of the lens.

Focus Control

Details the focus function of the lens.

IR Filter

Identifies the IR filter component.

Installation Procedures

Remove Current Lens Kit

Steps to remove the existing lens kit from TLC200 Pro.

Install IR Filter

Steps to install the IR filter onto TLC200 Pro.

Install Brinno Lens

Steps to install the Brinno Lens (BCS 24-70) on TLC200 Pro.

Focus Adjustment

Adjusting Lens Focus

Guide to adjusting the lens focus for object clarity.

Device Specifications

Long-Term Use and Care

Cleaning and Protection

Advice on preventing dust and fingerprints on the lens.

Storage Recommendations

Guidance on avoiding adverse storage conditions.