Why do my BRIO Water Filtration Systems filters make noise?
If your BRIO Water Filtration System filters are making noise, it could be due to several reasons. The filter may be jammed or needs replacement. Ensure the shut-off valve is in the ON position. Low ambient temperature may also cause light noise during operation.
Provides a general view of the installation process.
Details connecting the system to the cold water line.
Explains how to connect the drain line for rejected water.
Guides on mounting and connecting the smart faucet.
Final steps to finish the installation process.
Steps to power on and initialize the filtration system.
How to begin the water purification process.
Instructions for safely turning off the system.
Outlines when to replace different filter types.
Step-by-step guide to changing the filters.
Instructions for flushing filters before first use.
Provides a general view of the installation process.
Details connecting the system to the cold water line.
Explains how to connect the drain line for rejected water.
Guides on mounting and connecting the smart faucet.
Final steps to finish the installation process.
Steps to power on and initialize the filtration system.
How to begin the water purification process.
Instructions for safely turning off the system.
Outlines when to replace different filter types.
Step-by-step guide to changing the filters.
Instructions for flushing filters before first use.
General| Filtration Technology | Reverse Osmosis |
|---|---|
| Filter Life | 12 months |
| Installation Type | Under Sink |
| Stages of Filtration | 6 |
| Daily Production Capacity | 600 gallons |
| Included Components | Faucet |
| Warranty | 1 year |
To Next Page
