Need help?Do you have a question about the Briot emotion and is the answer not in the manual?
Procedure for safely removing the edger from its packaging and preparing it for setup.
Step-by-step guide to safely detach the shipping rails from the edger unit.
Details machine dimensions and requirements for bench preparation before installation.
Specifications and procedures for connecting the edger to water intake and discharge systems.
Guidelines for safely connecting the edger to the power supply and peripheral equipment.
Procedure for powering on and performing initial checks before operating the edger.
Essential safety guidelines for both the operator and the machine during operation and maintenance.
Best practices and advice for maintaining the edger's performance and longevity.
Overview of the edger's main components and their functions.
Explains the standard workflow and basic operational principles of the edger.
Description and classification of icons used in the edger's application interface.
Step-by-step instructions for common tasks like job creation and lens processing.
Covers specific functions like shape modification, applying oversize, and handling unique lens types.
Overview of the edger's configuration and settings menus.
How to set default values for finishing parameters to customize the edging process.
Procedure for adjusting machine settings to match specific operational needs.
Guidelines for correcting frame and lens data to ensure accurate edging.
Setting machine parameters for general operation, including language and size compensation.
Enabling or disabling communication functions for connected peripheral equipment.
Introduction to the maintenance section and its access screen.
Identification of edger parts and list of routine maintenance operations.
Maintenance steps for the touch screen, Scanform unit, and centering/blocking system.
Routine tasks for maintaining the edger, including part replacement and cleaning.
Procedures for replacing adaptor pads, mill bits, feeler tips, and visor.
Procedure for dressing the edger's wheels to maintain performance.
Procedures for cleaning the machine's filters and water tanks, including emptying.
Procedure for removing and replacing the machine covers for access.
Recommendations and table for preventive replacement of standard parts.
Section detailing various calibration and adjustment procedures for the edger.
Overview of settings access and procedures for adjusting Scanform, feeling, sizes, mill bit, and touch screen.
How to view current machine setting values for diagnostic purposes.
Guide to accessing and interpreting machine performance statistics.
Overview of the diagnostic test menus available on the edger.
Explanation of the layout and operation of a standard test screen.
Details the general operating principle and sequence for performing edger tests.
Describes screens related to solenoid valve and pump tests with switch controls.
Explanation of screens used for testing micro-switches and photocells.
Lists the key features and capabilities of the edger.
Provides detailed technical data including dimensions, power, and fuse information.
To Next Page
General