Bristan Colonial Tap Series User Manual (English)

Questions and Answers:

S
Sarah RossJul 28, 2025
How to fix a Bristan Colonial Tap with no flow or poor flow rate?
- E
  eric71Jul 28, 2025
  If your Bristan Water Dispenser has no flow or a poor flow rate, it could be due to several reasons. First, check that the stop or service valve in the water supply pipework to the tap is fully open. Another cause might be an airlock or blockage in the supply pipework; in this case, remove the water supplies and flush the system to clear any airlocks or debris. Also, ensure that the head of water meets the minimum distance required, referring to the Specification section for specifics. Finally, the valve might not be opening fully, requiring you to service the fitting.
K
Kaitlin HeathAug 4, 2025
What to do if Bristan Colonial Tap Water Dispenser fitting does not turn on?
- H
  Holly GarciaAug 4, 2025
  If your Bristan Water Dispenser fitting does not turn on, there are a couple of things to check. First, make sure that the water supplies to the fitting are turned on. Secondly, verify that the stop or service valve is open.
L
laurenwilliamsAug 12, 2025
Why is my Bristan Water Dispenser constantly dripping?
- C
  Courtney RamosAug 12, 2025
  If your Bristan Water Dispenser is constantly dripping or leaking when not in use, it's likely that the valve is not fully shutting off. In this case, you'll need to service the fitting and replace the cartridge or valve.
B
Brandi ZimmermanAug 19, 2025
What to do if water does not come out of the showerhead of Bristan Colonial Tap?
- M
  matthew14Aug 19, 2025
  If water isn't coming out of the showerhead when using the bath shower mixer on your Bristan Water Dispenser, it could be due to the diverter mechanism not being fully open; try fully opening the diverter lever. Alternatively, there might be insufficient water pressure or header height. Refer to the specification section for the minimum pressures required.