REVISED: 5/03
SUPERSEDES: 2/98
A & B SERIES
INSTALLATION & SERVICE INSTRUCTIONS
REFRIGERATION/AIR CONDITIONING/HEAT PUMP COMPRESSORS
BRISTOL COMPRESSORS, INC.
BRISTOL, VIRGINIA 24202
(276) 466-4121
FAX (276) 645-2423
WARNING
ALWAYS MEASURE START WINDING CURRENT ON START-UP!
NORMALLY 2 to 10 AMPS (See Page 5 for Details)
AND
BEFORE A SUSPECT COMPRESSOR IS REMOVED, ALWAYS
CHECK LOCKED ROTOR PULL-DOWN VOLTAGE
(See Page 2 for Details)
CAUTION: Bristol compressors are completely interchangeable with other
manufacturers. However, electrical specifications, tubing configurations,
and wiring connections may vary. Before installing and starting this
compressor, you must review the wiring diagrams and check for correct
electrical components.
To Next Page
