7 Filter Capacity
For the precise, continuous control of the degree of fi lter cartridge exhaustion, it is
recommended to install a control water meter (Art. 236600 together with Art. 315648,
Chapter 11).
Capacity Tables
PURITY 1200 Clean PURITY 1200 Clean Extra
Bypass setting
0 %
Bypass setting
10 %
Bypass setting
0 %
Bypass setting
10 %
Carbonate
hardness in
°KH
Volume
in litres
Volume
in litres
Total hardness
in °GH
Volume
in litres
Volume
in litres
4 20.000 21.778 4 6.200 6.751
5 20.000 21.778 5 6.200 6.751
617.50019.056 6 5.1675.626
7 15.000 16.333 7 4.429 4.822
8 14.000 15.244 8 3.875 4.219
9 13.000 14.156 9 3.444 3.751
10 12.000 13.067 10 3.100 3.376
11 10.500 11.433 11 2.818 3.069
12 9.250 10.072 12 2.583 2.813
13 8.077 8.795 13 2.385 2.597
14 7.500 8.167 14 2.214 2.411
15 7.000 7.622 15 2.067 2.250
16 6.563 7.146 16 1.938 2.110
17 6.176 6.725 17 1.824 1.989
18 5.833 6.352 18 1.722 1.875
19 5.526 6.018 19 1.632 1.777
20 5.250 5.717 20 1.550 1.688
21 5.000 5.444 21 1.476 1.607
23 4.565 4.971 23 1.348 1.468
25 4.200 4.573 25 1.240 1.350
28 3.750 4.083 28 1.107 1.206
31 3.387 3.688 31 1.000 1.089
35 3.000 3.267 35 886 964
Note: The stated capacities are guide values that may vary by ± 20% depending on the
product volume fl ow, local water quality and machine type.
8 Repair
Regularly check the fi lter system for leaks. Regularly check the hoses for kinks. Bent
hoses must be replaced.
The complete fi lter system must be replaced in rotation after 10 years.
The hoses must be replaced in rotation after 5 years.
!
Caution: Prior to exchange read the technical data (Chapter 10) and the operating and
safety information (Chapter 3).
19
To Next Page
Loading...
