Brita Maxtra+ - Cleaning Instructions; Funnel and Jug Cleaning; Lid Cleaning (Smart Light & Memo); Filter Preparation and Activation

1 Cleaning instructions for your new BRITA water lter jug
before rst use and after every water lter exchange
Funnel and jug
Dishwashersafe(max.50°C).
Forbestcleaningresults,turnthefunnelupsidedownandlettapwaterowthroughthe
valveforafewseconds.
IfyourBRITAwaterlterjughasbeenincontactwithfoodthatislikelytocause
discolouration(e.g.tomatoketchup,mustard)cleanyourBRITAwaterlterjug.Toavoid
possiblediscolourationofyourBRITAwaterlterjug,donotincludeitinadishwasher
containingdirtycrockeryfromsuchfoods.
Lid with BRITA Smart Light.
A1
BeforecleaningthelidinthedishwasherpleaseremovetheBRITASmartLightfromthe
lidbyturningitanti-clockwise.
A1
TheremovedBRITASmartLightmustnotbewashedinthedishwasher.Afterremoval
cleantheBRITASmartLightbyhandusingasoftanddampcloth.Aftercleaningthelid
simplyinserttheBRITASmartLightbackintothelidbyturningitclockwiseasfarasitwill
turn.
A2
Lid with non removable BRITA Memo
K
Thelidmustnotbewashedinthedishwasher.Cleanthelidbyhand.
Pleaseusemilddetergentsbutnoabrasivecleaners.Fordescalingthe
lidandtheBRITASmartLightusecommonhouseholdcitricacidbased
descalinguids.
TIP
2 Preparation of the MAXTRA+ water lter
B
Forqualityyoucantrust:BRITAhotsteamtreatmentforultimatehygieneinevery
MAXTRA+waterlter.RemovetheprotectivewrapperfromtheMAXTRA+waterlter
(Note:TheMAXTRA+waterltermaybedampfromsteamtreatmentprocess).Fillthe
cleanjugwithcoldwater.ImmersetheMAXTRA+waterlterincoldwaterandshakeit
gentlytoremoveanyairbubbles.RemovetheMAXTRA+waterlteranddiscardtheused
water.
3 Insert the MAXTRA+ water lter
C
ForoptimalltrationresultsitiskeythattheMAXTRA+waterlterisproperlyinserted.The
new BRITAPerfectFitsystemgivesyoureassuranceofaproperltrationbyallowingwater
toonlyowwhentheBRITA MAXTRA+waterlterisfullyinsertedandcreatingtheright
seal.Insertthefunnel(4)intothejug(5).PlacetheMAXTRA+waterlterintothehollow
ofthefunnelandpushdownwardsuntilitispositionedrmly.Ifthereisnowaterow
throughthefunnelafterllingthejugwithwater,thewaterlterisnotfullyinserted.Please
pressthewaterlterabitfurtherdownandtryagain.BRITAwaterlterjugsareespecially
designedtotwithMAXTRA+waterlters.BRITAcanthereforeonlyguaranteeoptimal
ltrationwhenusingaBRITA MAXTRA+waterlter.
4 Filling of the BRITA water lter jug
ThellingmethoddependsonthefeaturesinthelidofyourBRITAwaterltermodel.The
waterinthefunnelisautomaticallylteredandowsintothejug.
Variants of the lid
BRITA water lter jug with ip top lid
D
Carefullypressthelidontothejuguntilitisinplace.Opentheiptoplidandplacethe
openingunderthetap.FillyourBRITAwaterlterjugdirectlyunderthetapwithcoldwater.
BRITA water lter jug without pour through opening
E
Removethelidandllthefunnelwithcoldtapwater.Pressthelidontothejuguntilitisin
place.