Brita PRO PERFORMANCE NRV Series - TROUBLE SHOOTING GUIDE; Filter Bleeds Taste and Odor or Sediment; Low Water Pressure

12
PROBLEM POSSIBLE SOLUTIONS
TROUBLE SHOOTING
GUIDE
A. FILTER BLEEDS TASTE AND ODOR
OR SEDIMENT
1. By-pass valve open. Close by-pass valve.
2. Defective or stripped media bed Replace media
3. Quality of water has worsened Have water sample analyzed to determine
any change
4. Filter capacity too small Replace with larger unit or add
another filter
5. Leak between valve and central tube. Check if central tube is cracked or o-ring
is damaged. Replace faulty parts.
6. Internal valve leak. Replace valve seals, spacer, and piston
assembly.
B. LOW WATER PRESSURE
1. Iron or scale build up in line feeding unit. Clean pipes.
2. Iron build up inside valve or tank. Clean control and add resin cleaner to
clean bed. Increase regeneration
frequency.
3. Inlet of control plugged due to foreign
material.
Remove piston and clean control valve.