Brita WD 3020 - II. Quality from the very start; 1 Terms of warranty; 2 Contents of the BRITA Water Filter Kit

4 ENGLISH
II. Quality from the very start
1 Terms of warranty
The BRITA Dispenser is subject to the statutory guarantee of
2 years. A guarantee claim may be asserted only if all instructions in
this handbook are followed and observed.
2 Contents of the BRITA Water Filter Kit
To ensure you get the best result from your BRITA Water Filter Kit,
please follow these instructions carefully.
Your BRITA Water Filter Kit includes the following
(see fig. 1):
1. Filter head with three settings including a convenient locking
handle
2. Flexible wall mount
3. P 1000 water filter cartridge
4. BRITA Dispenser (design may differ from image shown)
5. BRITA Cartridge Status Indicator
6. Battery (CR2032)
7. Hose (1) length = 800 mm, 3/8" nut on one side and M8 con-
nector on the other side, 2 Hoses (2+3), length = 450 mm,
3/8" nut on one side and M8 connectors on the other side
8. Hose (4), length = 800 mm and 3/8" nut on both sides
9. 2 Adapters 1/2" female thread to 3/8" male thread (Only in UK)
10. Usage Instructions
11. Carbonate hardness testing strip
12. T-piece
13. Gaskets
Recommended tools for installation: a pipe wrench, an Allen key
(4 mm), a wrench and a screwdriver.
For wall mounting the cartridge (optional), you need: two screws
(e.g. 5 mm thread diameter) and, if required, two wall plugs suitable
for your type of wall.
1. 2.
3.
4.
5.
6.
7.
8.
10.
(fig. 1)
9.
11.
12.
13.