EasyManua.ls Logo

BRITAX RÖMER MAX-SAFE PRO - SICT

BRITAX RÖMER MAX-SAFE PRO
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.3.1 Attach seat insert
2
1
4
5
3
1
Harness buckle
4
Padded crotch
2
Seat insert
5
Recess
3
Shoulder strap
1. Open the harness buckle 1 by pressing the red button.
2. Place the seat insert 2 into the child seat.
Note the orientation of the seat insert. You can use
the wash label as a guide. The wash label is on the
back of the seat insert and should face the child
seat.
3. Pass the harness buckle 1 and the padded crotch 4
through the recess 5 on the lower section of the
seat insert 2.
4. Place both shoulder straps 3 over the seat insert 2.
3.3.2 Remove seat insert
1
2
1
1
Seat insert
2
Harness buckle
1. Open the harness buckle 1 by pressing the red button.
2. Remove the seat insert 2.
3.4 SICT
The SICT (Side Impact Cushion Technology) reduces
the forces affecting the child in the event of a side
impact. The protective effect of the SICT element is
greater, the closer it is to the car door.
The SICT element is independent of the type of fas-
tening. For simplicity, the following illustrations show
fastening type A.
3.4.1 Secure SICT element
1
1
2
1
SICT element
2
Car door
1. Place the SICT element 1 to the side of the child seat.
Select the side of the child seat closest to the car
door.
The sign symbol with number 1 on the SICT ele-
ment faces the sign symbol of the SICT fastening
point on the child seat.
2. Slide the SICT element 1 onto the SICT fastening point.
3. Check the distance between the SICT element 1 and
the car door 2.
ADVICE
Material damage as a result of SICT element
In rare cases, the space between the car seat and
the car door is so small that the SICT element touch-
es the car door. The car door may be scratched
when it is closed.
Carefully close the car door.
Make sure that the SICT element does not touch
the car door.
Do not close the car door fully if the SICT ele-
ment is touching the car door.
4. If the SICT element 1 is touching the car door 2, reduce
the distance of the SICT element 1 (See "Reduce dis-
tance", Page 8).
If the SICT element is not touching the car door,
no further steps are necessary.
IP10204 | 1.2 | 2000038517 MAX-SAFE PRO | BRITAX RÖMER 7

Related product manuals