Britax B-AGILE Double - Assembly; Unfolding the Stroller

6 7
• Push the release button on
the chassis lock and open
the frame
• Slide the pin on the rear
wheel into the mounting
bracket on the rear axle until
it locks into place
• Pull wheel to ensure that it is
secure
• Lift handle until frame locks
into upright position
• Slide the front wheel
assemblies onto the
mounting posts at the front
of the stroller
• Pull each wheel to ensure
that it is secure
Unfolding
Front Wheels
Rear Wheels
• Pull and hold the release
lever on the bottom of the
rear axle, while pulling the
rear wheel away from the
stroller
Removing Front Wheels
Removing Rear Wheels
• Press the release button
on the bottom of the wheel
assembly and pull away
from the stroller
AssemblyAssembly