20
Recline Positions
This child seat has 3 positions. To adjust, pull the recline handle then rotate
the child seat shell into the desired position. Release the recline handle,
then verify the child seat has locked into position.
NOTE: Set the recline position BEFORE installing.
Rear-Facing
When installed in the rear-facing position, the child
seat should be reclined at least 30˚ from vertical
for children and up to 45˚ from vertical for infants
unable to maintain head and neck control (not
to exceed 45˚) when the car is parked on a level
surface. When installing the seat in rear-facing
mode, recline the seat to position 3 and use the
guide line on the child seat to help achieve an
acceptable recline angle for rear-facing installations.
Position 1 Position 2 Position 3
Child Seat Functions
To Next Page