26
IMPORTANT: The Versa-Tether
®
carry clip is only for
use when you wish to carry the child seat between
locations. Do not install the child seat with the Versa-
Tether attached to the carry clip. Secure the excess
Versa-Tether webbing in the elastic strap during use.
Store the Versa-Tether in the storage pouch when not in
use. Always ensure any excess webbing is contained
within your vehicle.
To attach the Versa-Tether to the carry clip or tether anchor:
1 Firmly press the hook over
the carry clip or tether
anchor point.
2 Pull the loose end of the
webbing to remove slack from
the Versa-Tether.
NOTE: When using as a carry strap, tighten until the strap is comfortable to carry.
To remove the Versa-Tether from the carry clip:
1 Loosen the Versa-Tether.
a Tilt the lock up
b Pull the tether webbing
2 Remove the Versa-Tether
®
hook from the carry clip.
Child Seat Functions
To Next Page