30
1 Firmly press the lower
connectors onto the adjacent
lower anchors.
• A click confirms attachment.
• Verify that the lower connector
strap is not twisted.
TIP: You may need to turn the front
of the child seat toward you
for easier access to the lower
anchors.
NOTE: If a click is not heard when
connecting either lower connector,
the lower connector strap may be
twisted, or there may be debris in
the lower connector. Correct either
situation before continuing with the
installation process.
2 Push the child seat down while
pulling each lower connector
strap to tighten.
3 Rear-facing installations can be improved by the use of the
Versa-Tether (see pages 24 – 27).
Rear-Facing Installation
To Next Page