42
1 Firmly press the lower
connectors onto the adjacent
lower anchors.
• A click confirms attachment.
• Verify that the lower connector
strap is not twisted.
TIP: You may need to turn the back
of the child seat toward you for
easier access to the vehicle lower
anchors.
NOTE: If a click is not heard when
connecting either lower connector, the
lower connector strap may be twisted,
or there may be debris in the lower
connector. Correct either situation
before continuing with the installation
process.
2
Push the child seat down while
pulling each lower connector
strap to tighten.
3 Attach the Versa-Tether to
a designated anchor (see
vehicle owner’s manual)
and remove slack.
4 Store excess webbing in the
elastic strap.
Forward-Facing Installation
To Next Page
Loading...
