47
Checklist
9 Check that the vehicle belt is securely fastened.
9 Check that no more than 20% or 3 inches (7.6 cm) of the base hangs
over the edge of the vehicle seat.
9 Check that the child seat cannot be moved front to back or side to side
more than 1 in. (2.5 cm) at the belt path. If the child seat is not secure,
repeat installation or use a different seating location.
9 Check that any excess Versa-Tether
®
webbing is contained within your
vehicle and secured in the elastic strap.
8 Attach and remove slack from
the Versa-Tether (if an anchor
point is available).
9 Store excess webbing in the
elastic strap.
10 Replace the cover.
Forward-Facing Installation
Check Versa-Tether
®
(Top Tether) attachment
Check that there is
LESS than 1 in. (2.5 cm)
of movement (front to back or
side to side) at the belt path
Check buckle
connection
Check that no more than
20% or 3 inches (7.6 cm)
of the base hangs over the
edge of the vehicle seat
Check that Versa-Tether
®
(Top Tether) webbing is
stored in the elastic strap
To Next Page