Britax Chaperone Stroller - Returning Stroller to Standard Mode; Securing Child & Adjusting Harness

Operating Instructions
Returning Stroller to Standard Mode
With brake applied and infant carrier 1
removed, raise back rest to upright
position.
Rotate infant carrier attachment tabs
2
to lowered position.
Fold backrest flap down and snap in place.
3
Ensure harness straps are properly adjusted and are not twisted.4
Operating Instructions
Securing Child & Adjusting Harness
(Standard Mode)
Lock parking brake and ensure that stroller is NOT in infant carrier mode.1
Press the child tray release button on either side and rotate tray completely up 2
and away from seat area.
Fit harness around child and adjust
3
each strap securely around child by
sliding the adjustment clips up or
down.
Secure buckle by pushing each clip
4
into the sides of the buckle until a
click is heard.
18 19
IMPORTANT
Ensure that infant carrier tabs
have been lowered before
allowing child to sit in stroller