Infant Carrier Mode
Operating Instructions
From back of the stroller and with 1
backrest in upright position (pg. 23)
rotate both infant carrier attachment
tabs to the upright position.
From the front of the stroller, unbuckle 2
the main harness buckle.
Unsnap the backrest carrier flap 3
from the lower end of the seat back
and fold it up.
Secure flap with toggle and loop,
4
making sure that the harness is stored
behind flap when it is secured.
Lower the backrest to lowest position
5
to receive infant carrier.
Operating Instructions
Infant Carrier Mode (Cont.)
Child tray must be attached and locked in the lowered position, and stroller 6
canopy must be attached to secure infant carrier.
14 15
To Next Page
Loading...
