EasyManua.ls Logo

Britax ClickTight Series User Manual

Britax ClickTight Series
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CLICKTIGHT
®
Convertibles
Instructions / Instructions / Instrucciones
Consumer Service:
888.427.4829 or 704.409.1699
Britax Child Safety, Inc., 4140 Pleasant Road, Fort Mill, SC 29708, U.S.A.
© 2015 Britax Child Safety, Inc. All rights reserved.
P04337900_A:08.15
Page 1 of 3
Harness Adjuster Button Remedy Kit:
•Non-Toxic, Food-Grade Lubricant
•Remedy Label
•No Tools Required
Harness Adjuster Button Remedy
Instructions
IMPORTANT: For more information about
this remedy kit, its components, and a video
detailing these instructions, please visit www.
BritaxClickTightConvertibleRecall.com.
1. Unbuckle the vehicle seat belt and open the
CLICKTIGHT (Fig. 1).
a. Press the dimple on the CLICKTIGHT dial.
b. Rotate dial clockwise until CLICKTIGHT
releases and lift to open.
NOTE: You do not need to remove your child
seat from the vehicle.
2. Locate the harness adjuster button (red) on
the underside of the CLICKTIGHT (Fig. 2).
3. Squeeze the tabs on both sides of the harness
adjuster button and pull the button out of the
CLICKTIGHT (Fig. 3).
4. Tear the tab on the lubricant tube to open
and apply a thin layer around the sides of the
harness adjuster button (Fig. 4).
5. Slide the harness adjuster button back into the
channel on the underside of the CLICKTIGHT
(Fig. 5).
NOTE: Ensure that the harness adjuster button
is installed with the wider side at the top.
6. Discard any excess lubricant and the applicator,
then wash your hands.
7. Lift the right front of the seat cover and apply
the provided remedy label next to date of
manufacture label on seat pan (Fig. 6), then
write in the date on the line provided.
8. Buckle the vehicle seat belt and close the
CLICKTIGHT.
- A click confirms the CLICKTIGHT is secure.
9. Secure your child in the seat and pull forward
on the harness straps to confirm proper
function and snugness of the harness can
be achieved. If you have any questions or
concerns, please contact BRITAX Consumer
Service.
1 2
3
1b
1a
4
5
PRODUCT NAME - XXXXXXXXXX
BATCH NO: Job0XXXXXXX
SERIAL NO: XXXXXXXXXXXXX
MANUFACTURED/
FABRICADOS:
MM
mo/mes
YYYY
yr/ano
MANUFACTURED BY/FABRICADOS POR:
BRITAX CHILD SAFETY, INC.4140 PLEASANT RD
FORT MILL, SC 29708 USA
6
Question and Answer IconNeed help?

Do you have a question about the Britax ClickTight Series and is the answer not in the manual?

Britax ClickTight Series Specifications

General IconGeneral
CategoryConvertible Car Seat
TypeConvertible
Weight Limit (Rear-Facing)5-40 lbs
Weight Limit (Forward-Facing)20-65 lbs
Height Limit (Rear-Facing)Up to 49 inches
Height Limit (Forward-Facing)Up to 49 inches
LATCH CompatibilityYes
Side Impact ProtectionYes
Installation TypeClickTight
Harness Type5-Point
Warranty1 Year
Installation MethodSeatbelt or LATCH

Summary

Harness Adjuster Button Remedy Instructions

Prepare CLICKTIGHT and Locate Button

Unbuckle seat belt, open CLICKTIGHT dial, and locate the red harness adjuster button.

Remove and Lubricate Harness Adjuster Button

Squeeze tabs to remove the button, apply lubricant to its sides, and reinsert it properly.

Apply Remedy Label and Test Harness

Apply the remedy label, close CLICKTIGHT, and test harness function for proper snugness.

Related product manuals