Britax COMPAQ - Page 20

Child use
seat belt
path
A
B
Fully press Adjuster
Button (A) while pulling
Upper Anchorage Strap (B)
to lengthen.
Upper Anchorage
Strap
Storage
Strap
Upper Anchorage
Adjustment Strap
Pull to remove
slack
Anchor
Fitting
Attachment
Clip & Cover
H.
I.
Engage seat belt buckle and tongue,
ensure to remove all slack from lap
part of seat belt by pulling sash belt.
Adjust the seat belt to hold the
restraint firmly against the vehicle
seat. For inertia/retractable seat belts,
allow excess belt to feed back into
retractor.
Fit the attachment clip to the anchor
fitting as shown right. Make sure to
remove as many twists as possible from
the upper anchorage strap.
Anchor
fitting
Attachment
Clip & Cover
Front of vehicle
HOW TO INSTALL
J. Tighten Adjustable Upper Anchorage Strap by pulling adjustment strap
to remove slack as shown below, but do not over-tighten causing the
restraint base to lift off the vehicle seat. Fold up excess strap and use
storage strap to neatly store excess strap away from child's reach.
20
Forward Facing (8kg up to 18kg)