How to Care for Your Cruiser
9
The cover of the Cruiser is held in place by a zipper on the
back side and a panel with velcro behind the child. Open the
zipper and the panel and carefully remove the cover.
CLEANING THE COVER
Read the label on the cover for washing instructions. The
cover is machine-washable.
DO NOT machine dry the cover - drip dry only.
CLEANING THE HARNESS AND SEAT
Only use hand soap and warm water.
DO NOT remove or take the head support apart when
removing the cover or cleaning the Cruiser. It is unnecessary
and will damage the Cruiser.
DO NOT use solvents, detergents or cleaning fluid as these
may weaken the belts or seat structure.
Taking Off the Cover - Step 1
Lay the Cruiser on a clean, flat
s u rface and undo the hook
and eye found underneath the
head support cover.
Taking Off the Cover - Step 2
Unhook the elastic loops
f rom the seat belt guides and
gently pull off the head sup-
p o rt cover.
Incompatible Seating Positions
8
WARNING!
Use the Cruiser in vehicle
seats which are forward fac-
ing only!
Do not use on rearward-fac-
ing or side facing vehicle
seats.
You must use forward-fac-
ing vehicle seats with this
restraint. Side-facing or
rear-facing vehicle seats in
vans, station wagons or
trucks CANNOT be used
with this restraint.
To Next Page
Loading...
