EasyManua.ls Logo

Britax FRONTIER 90 - Securing Child in Booster Mode

Britax FRONTIER 90
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32 33
Harness to Booster Mode: Removing the Harness and Buckle
1 Loosen the harness
completely.
a Press release lever
b Pull both harness straps forward
4 Open the CLICKTIGHT.
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
5 Unhook the harness straps
from the CLICKTIGHT hip
anchors.
2 Unhook the harness straps from
the yoke.
* Store the yoke in a secure
place in the base.
3 Pull the harness straps out of
the slots.
7 Turn and pull the buckle
retainer through the slot in the
child seat shell.
6 Unhook the retaining clips at
the back of the seat cover. Pull
the seat cover forward and
over the belly pad.
8 Fasten the harness buckle.
7 Fasten the chest clip.
* Push together until a click is
heard.
9 Pull the adjuster strap to
tighten the harness.
* Pull the harness adjuster away
from the child seat (parallel to
the ground) to tighten.
Switching Between Modes Switching Between Modes

Table of Contents

Related product manuals