To Next PageTo Next Page
Need help?Do you have a question about the Britax MOTION 3 and is the answer not in the manual?
Always apply the brakes when the stroller is stationary to prevent accidental rolling.
Ensure the child is always secured in the harness and straps are correctly adjusted.
Avoid hanging items, use tether strap, park on flat surfaces, and never let go when parked on inclines.
General maintenance tips including cleaning, drying, and checking parts for tightness and wear.
Instructions for storing the stroller properly to prevent damage from heat, dust, and sunlight.
Periodically check brake function and clean debris to ensure secure locking.
Wipe frame and plastic parts with mild soap and water; avoid abrasives and strong cleaners.
Inflate tyres to recommended pressure; use hair dryer for compression marks.
Hand wash with cold water and mild soap; do not machine wash, tumble dry, or iron.
Stroller is for walking speed only; avoid running, jogging, skating; lock swivel wheels on rough surfaces.
Adhere to weight limits for basket, canopy pocket, and maximum child weight (22kg stroller, 12kg car seat).
Only use accessories tested and approved by Britax for maximum safety.
Upright positions not suitable for children under six months; use lowest recline for infants.
Do not leave child exposed to strong sun; canopy/hood offers no total protection from harmful rays.
Identifies main parts like Handle, Canopy, Harness, Frame Lock, Wheels, and Storage Basket.
Provides easy storage for drinks and snacks.
Protects child from sun and insects while outdoors.
Offers extra protection from the cold for your child.
Provides protection from rain for your child.
Step-by-step instructions for safely removing the infant car seat from the stroller.
Align car seat adaptors with receivers, push handle down until it locks, and ensure it is securely installed.
Lower car seat into receivers, squeeze handle latches, and rotate handle backwards to lock securely.
Unity BOB infant car seat is the only compatible seat; must be fitted correctly and used rearward facing.
Do not leave child unattended for extended periods; max child weight 12kg; remove before folding stroller.
Lists the BOB MOTION 3 Stroller, Rear Wheels, Canopy, Front Wheel, and Infant Car Seat Receivers.
Procedure to release the chassis lock and open the frame to its upright position.
Instructions for sliding the front wheel mounting pin into the housing until it clicks securely.
Steps to slide the rear wheel pin into the axle bracket until it locks, ensuring correct left/right placement.
Push metal tab above swivel lock to release wheel, then pull away from stroller.
Pull and hold release lever on axle bottom while pulling rear wheel away.
Information on inflating pneumatic tyres using pump or garage pump with pressure limits.
Slide canopy stay brackets into frame mounts until they lock into place.
Snap support strap to frame and connect using hook and loop fasteners inside the canopy.
Attach hook and loop fasteners around canopy edge and back flap to the stroller frame.
Align labelled receivers with frame mounts, push down until 'click', and pull up to ensure lock.
Squeeze button on the receiver and lift upward to detach.
Press pedal down to lock, lift to release. Test by attempting to roll stroller.
Lift lever up to lock front wheel; press down to unlock. Lock on rough surfaces.
Pull release lever to recline; pull straps apart to raise. Ensure child's limbs are supported.
Open by pulling forward, close by pushing backward. Open window flap for ventilation.
Squeeze handle buttons, rotate to desired height, release buttons to lock.
Use wrist tether strap to prevent stroller rolling away; slide hand through loop when using.
Apply brake, remove child, press frame lock button, lift release strap to collapse stroller.
Use harness at all times; disconnect straps when not in use to prevent strangulation.
Place child, position straps, insert buckle tongues into waist straps through guides.
Tighten/loosen shoulder and crotch straps using 3-bar adjusters; tighten waist straps with 4-bar slider.
Ensure shoulder straps are just above child's shoulders; adjust lower section to fit child's height.
General| Number of Wheels | 4 |
|---|---|
| Recline Positions | Multiple recline positions |
| Harness Points | 5-point harness |
| Storage Basket | Yes |
| Weight Capacity | 55 lbs |
| Seat Position | Forward Facing |
| Fold Type | Compact Fold |
| Car Seat Compatibility | Compatible with Britax infant car seats |
| Safety Features | Adjustable safety harness |
| Storage | Storage basket under the seat |
| Weight | 26.5 lbs |
| Compatible Car Seats | Britax Römer infant carriers |
