HOW TO SET-UP
To avoid pinching your ngers follow the
steps above.
A. Squeeze the carry handle release latch on
each side of the handle and rotate to the rst
position-“rocking position” .
B. Squeeze the latch again and start to rotate the
handle then remove both hands from the latches
and use one hand at the top of the handle to
rotate down further until the handle latches
in the second or “non-rocking position” .
The carrier is now locked to the stroller.
ADJUSTMENT OF HANDLE POSITION WITH BRITAX
STROLLER CLICK & GO™ ADAPTOR
2
3
Push down until it clicks into place.
To Next Page
Loading...
