31
HOW TO USE
D. Ensure the upper anchorage strap attachment clip
have been tted to the car’s anchor tting. If not
already connected, refer to page 25.
E. Feed the Upper Infant Carrier strap on the inside
of the handle and through the locating slots in
the front of the Infant Carrier.
F. Adjust the Upper Anchorage Strap by pulling as
shown below to remove any slack in the straps.
Do not over tighten.
Upper Anchorage Strap.
Pull to
remove slack
Press button to
lengthen
Adjuster
Upper anchorage strap
Locating Slots
The Upper anchorage strap must be tted at all times when the baby is in the car.
IMPORTANT :
To Next Page
Loading...
