This document describes the Britec Air Fresh 10, an evaporative air cooler designed for indoor use. It functions as a climate control device, providing cooling and air circulation.
Function Description
The Britec Air Fresh 10 is an evaporative air cooler, which means it cools the air through the evaporation of water. It draws in warm air, passes it over water-soaked pads, and releases cooler, humidified air. This process is energy-efficient, consuming only 35W of power. The device also features an ionizer function, which helps to purify the air by releasing negative ions, and a fan function for air circulation. It is designed for indoor use and is not suitable for outdoor environments or areas with high humidity, such as bathrooms or swimming pools.
Important Technical Specifications
- Power Consumption: 35W
- Airflow: 800 m³/h
- Speed Settings: 12 levels (01-12)
- Timer: Programmable from 1 to 12 hours
- Functions: Cooling, Oscillation, Ionizer, Light
- Water Tank Capacity: The manual specifies MIN and MAX marks for water filling.
- Cool Packs: Includes two cool packs to enhance cooling effect.
Usage Features
The Britec Air Fresh 10 offers several user-friendly features:
- Control Panel Operation: The device has an intuitive control panel located on the unit itself. This panel includes buttons for:
- ON/OFF: To switch the appliance on and off.
- SPEED: To adjust the fan speed from 01 to 12. The display shows the current speed.
- TIMER: To program the device to switch off automatically after a set period (1 to 12 hours). Repeated presses cycle through the timer settings.
- COOLING: To activate the evaporative cooling function. The water level indicator should be above the MIN level. When activated, the appliance starts pumping water to create cool and moist air.
- OSCILLATION: To activate or deactivate the oscillation function, which distributes air horizontally in the room. The display lights up when active.
- ANION (ION): To activate the ionizer function for air purification.
- LIGHT: To turn on or off the decoration light.
- Remote Control: The device comes with a remote control for convenient operation from a distance. The remote uses AAA batteries. Users are advised to pay attention to polarity when inserting batteries and to close the cover correctly. The remote should be pointed directly at the front of the appliance and kept away from direct sunlight and heat sources.
- Water Tank Filling: The water tank is filled from the top of the appliance. Users must check the rubber plug at the back of the appliance to ensure it is firmly inserted into the water outlet to prevent leaks. Water should be poured into the top part of the unit, checking the level on the front display. The water level must be filled above the MIN mark for the pump to function correctly and not exceed the MAX mark to prevent water from entering the appliance's interior and damaging electronic parts. After filling, the cover should be closed. If the exterior of the water tank becomes damp or wet, it should be wiped dry with a soft cloth.
- Cool Pack Usage: Two cool packs are included to enhance the cooling effect. These should be filled with water up to the MAX mark and placed in a freezer for at least 3-4 hours before use. They are then placed in the compartment on the top of the appliance.
- Placement: The appliance should be placed on a level and solid surface. It should be at least 50 cm away from walls or other objects to ensure proper air circulation. The air inlet and outlet must be free of obstacles. It should be connected to an earthed electrical outlet.
- Safety Instructions:
- Read the manual carefully before installation, monitoring, operating, or maintenance.
- Do not use the appliance in rooms with gas, oil, or sulfur.
- Avoid using extension cables as they can overheat and cause a fire.
- Do not modify the appliance's characteristics. Use only manufacturer-recommended spare parts and accessories.
- Keep children away from the appliance and packaging to prevent suffocation from small parts.
- Children under 8 years old and individuals with limited physical, sensory, or mental capabilities should only use the appliance under proper supervision and detailed instructions.
- Never leave the appliance running unattended.
- Do not twist, bend, or pull the power cord.
- Do not operate the appliance with wet hands.
- Do not use the appliance outdoors.
- Never cover the appliance.
- Do not place the appliance near water or in highly humid areas (e.g., damp basements, near pools, showers, or bathtubs). Ensure no water enters the appliance.
- Maintain a minimum distance of 50 cm from combustible substances (e.g., alcohol) or pressurized vessels.
- Do not place heavy or hot objects on top of the appliance.
- Do not insert fingers, pins, or other objects into the appliance.
- Change the water regularly.
- Do not attempt to open the cool packs, as the liquid inside can be harmful to health.
- Always switch off the appliance before unplugging it.
- Do not pull the mains cable to disconnect the appliance; pull the mains plug.
- Do not handle the plug with wet or damp hands.
- When not in use, store the appliance vertically in a safe, dry place inaccessible to children, and do not cover it with plastic packaging.
- Maintain the appliance in good condition by cleaning and maintaining it. Contact customer service for any questions.
Maintenance Features
Regular maintenance is crucial for the appliance's efficiency and longevity.
- Cleaning the Cover Grille:
- Switch off the appliance and unplug it from the mains power supply.
- Use a screwdriver to remove the two locking screws on the cover grille and remove the cover grille.
- Use a vacuum cleaner to remove accumulated dust from the cover grille.
- If the cover grille is very dirty, immerse it in warm water and rinse it several times. The water temperature should not exceed 40°C.
- Before putting the cover grille back, allow it to dry thoroughly after washing.
- Replace the cover grille and secure it with the locking screws.
Note: Never use the appliance without the cover grille.
- Cleaning the Housing:
- Before cleaning, switch off the appliance, wait a few minutes, and then unplug it.
- Clean the appliance with a moderately damp cloth, then wipe it dry with a dry cloth.
- Never use benzene, alcohol, or solvents to clean the appliance.
- Do not spray insecticides or similar agents on the air cooler.
- Emptying the Water Tank:
- It is recommended to empty and clean the water tank every 2-3 weeks during use.
- Remove the water tank from the appliance.
- Remove the water pump from its safety holder.
- Remove the water tank completely from the appliance.
- Clean the tank both inside and outside with a soft cloth that has been previously immersed in soapy water.
- Then rinse the tank with warm and clean water.
- Allow the tank to dry completely and then put the water pump back into the plastic holder before inserting and filling the water tank.
- End of Season Activities:
- Switch off the appliance and disconnect the mains plug.
- Carefully empty and clean the water tank.
- Clean the cover grille and reinsert it after drying.
- Ensure the air cooler is completely dry and perfectly clean.
- This step is very important to maintain optimal performance for the next season.
- Ideally, repackage the appliance for storage (to prevent moisture).
- Store the appliance in a cool, dry place.
- Beginning of Season Inspections:
- Verify that the power supply cable is in order and that the earthing is functioning.
- Follow the installation and safety instructions carefully.
Troubleshooting
The manual provides a troubleshooting guide for common issues:
- Problem: The air cooler does not switch on.
- Possible Cause: Power failure.
- Solution: Wait for the power supply to be restored.
- Possible Cause: The appliance is not connected to the power supply.
- Solution: Connect/plug the appliance to the power supply and wait for a minimum of 30 minutes.
- Problem: The air cooler works only for a short amount of time.
- Possible Cause: The water tank is empty.
- Solution: Fill the water tank.
- Possible Cause: Something is blocking the air outlet.
- Solution: Check and remove all obstacles that are blocking the air supply.
- Problem: During operation, an unpleasant odor is emerging from the room.
- Possible Cause: The air filter or water tank is dirty.
- Solution: Clean the air filter(s) and/or water tank in accordance with the description.
- Problem: The appliance is very loud.
- Possible Cause: The floor that the air cooler is located on is not level.
- Solution: Place the air cooler in a different location.
Need help?
General
To Next Page
