EasyManua.ls Logo

British Fires NEW FOREST ELECTRIC 48" - User Manual

British Fires NEW FOREST ELECTRIC 48"
49 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2020 British Fires
NEW FOREST ELECTRIC 48" & 63" FIREPLACES
INSTALLATION & USER INSTRUCTIONS
EN 01-42 FR 43-88
CHEMINÉES ÉLECTRIQUES NEW FOREST
DE 122 CM ET 160 CM (48" ET 63")
GUIDE D’INSTALLATION ET MODE D’EMPLOI

Table of Contents

Questions and Answers

  • J
    Jimmy MartinAug 11, 2025
    Why is my British Fires NEW FOREST ELECTRIC 48" Stove not emitting heat?
    • D
      Daniel GrantAug 11, 2025
      If your British Fires Stove isn't emitting heat, it could be due to a couple of reasons. First, the energy-saving thermostat might be in play. Try selecting a temperature setting higher than the current room temperature to kickstart the heater. Alternatively, the safety cut-out might have been activated. To resolve this, switch off the appliance, wait for about 10 minutes, and then switch it back on.
  • G
    greentiffanyAug 17, 2025
    How to fix British Fires Stove that is not switching on?
    • D
      Dr. Lauren DavisAug 18, 2025
      If your British Fires Stove isn't switching on, first, ensure that the mains switch is turned on. If it still doesn't power up, try replacing the fuse in the plug.
  • A
    Allison DiazAug 23, 2025
    What to do if British Fires Stove shuts off after a period of time?
    • U
      uoliverAug 23, 2025
      If your British Fires Stove shuts off after a period of time, there are a few things you can check. Make sure the temperature isn't set too low. Also, verify that the air inlet/outlet isn't blocked. Finally, check that the window detection sensor hasn't been activated.
  • B
    ballisonAug 28, 2025
    What does OP mean on British Fires NEW FOREST ELECTRIC 48" Stove display panel?
    • R
      Rachael FosterAug 28, 2025
      When the display panel of your British Fires Stove shows 'OP', it indicates that the open Window Detection function is active. This function automatically turns off the heating. To clear this, turn off the appliance and then turn it back on to restart and clear the fault code.
  • J
    Joel MorrisSep 4, 2025
    What does EE mean on British Fires NEW FOREST ELECTRIC 48" display panel?
    • M
      Mary DennisSep 4, 2025
      If the display panel on your British Fires Stove shows 'EE', a service engineer will need to inspect the appliance for any loose connections.

British Fires NEW FOREST ELECTRIC 48" Specifications

General IconGeneral
BrandBritish Fires
ModelNEW FOREST ELECTRIC 48"
CategoryStove
LanguageEnglish