Need help?Do you have a question about the British Gas Potterton Precision and is the answer not in the manual?
General| Brand | British Gas |
|---|---|
| Model | Potterton Precision |
| Category | Boiler |
| Language | English |
Outlines responsibilities of manufacturers and installers for ensuring correct equipment and installation standards are met.
Specifies conditions and requirements for water circulating systems compatible with the boiler.
Provides detailed instructions for the correct installation of the condensate discharge pipe.
Covers initial preparation steps, including checking gas supply and site requirements.
Provides instructions for safely fitting the boiler to the wall plate.
Explains how to install the horizontal flue system, including cutting and measurements.
Outlines the steps and requirements for commissioning the boiler according to standards.
Details the mandatory procedure for checking combustion performance at different rates.
Explains how to check the operational gas inlet pressure for correct operation.
Guides on how to correctly fit the boiler's outer case and lower door panel.
Recommends annual servicing and outlines checks to be performed for safety and economy.
Details the inspection steps for annual servicing, including component checks.
Troubleshooting guide for electrical supply issues affecting boiler operation.
Fault finding steps related to the dry-fire condition, potentially caused by water flow issues.
Troubleshooting steps for ignition lockout faults, including gas supply and probe checks.
Fault finding procedures for overheat lockout, involving thermostat and seal checks.
Troubleshooting steps for fan lockout faults, including wiring and continuity checks.
Fault finding for thermistor issues, checking resistance and PCB connections.
To Next Page
