BRK electronic SC7010B

To Next Page

The BRK Cat. No. SC7010B is a wire-in, 120V AC 60Hz single and/or multiple station

combination smoke and carbon monoxide alarm speciﬁcally designed for residential

and institutional applications including sleeping rooms of hospitals, hotels, motels,

dormitories and other multi-family dwellings as deﬁned in standard NFPA 101. Model

SC7010B complies with UL217 and UL2034, CSFM, NFPA 72 and NFPA 720, HUD, FHA

and other agencies that model their codes after the above agencies. It meets building

codes where AC/DC photoelectric smoke and carbon monoxide alarms are required.

The BRK SC7010B is a state-of-the-art hardwired with battery backup smoke/CO combo

alarm that features a photoelectric smoke sensing chamber and electrochemical CO sensor.

The Spread Spectrum Horn Tone has a lower and varying frequency that makes it easier for

the elderly with normal age related hearing loss to hear the horn. This alarm features two

latching features and two silence features. Alarm Latch: Easily identiﬁes initiating alarm even

after alarm condition has subsided. Low Battery Latch: Identiﬁes which unit is in low battery

condition by blinking the green power light. Low Battery Silence: Temporarily silence the low

battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. Other

features include an 85dB horn, single button test/silence, an easy access battery drawer.

OptiPath 360 Technology: Exclusive patented technology provides 360˚ of direct access to

the smoke sensor. The alarm is interconnectable with up to 18 devices, of which 12 can be

smoke alarms. The unit mounts to any standard electrical box up to 4” size. Keyhole slots in

the mounting bracket eliminate the need to remove the electrical box screws for installation.

Includes Perfect Mount, a mounting bracket that keeps the alarm secure over a wide rotation

range to allow for perfect alignment. Dust cover is included to keep the alarm clean during

construction. Battery installation and removal can occur while the unit is mounted to the

ceiling or wall via the side battery compartment. Two locking features are provided to prevent

battery theft and/or theft of the unit. Connection to AC power is made with a “Quick-Connect”

wiring harness. Installation is quick, easy and cost effective.

SPREAD SPECTRUM

HORN TONE

Easier for elderly with normal age

related hearing loss to

hear horn.

TWO LATCHING

FEATURES

Alarm Latch and Low Battery Latch

TWO SILENCE FEATURES

Silence low battery chirp for

up to eight hours or silence

nuisance alarm.

OPTIPATH 360

TECHNOLOGY

Patented technology provides 360º

of direct access to smoke sensor.

120V AC/DC, 60Hz

Wire-in with 3V (two 1.5V AA) Battery Backup

SMOkE & CO

COMbO ALARM

P H O T O E L E C T R I C

CAT.

SC7010b

Description:

Need help?

Do you have a question about the BRK electronic SC7010B and is the answer not in the manual?

Summary

Product Overview and Key Features

Wire-in Alarm with Battery Backup

120V AC/DC, 60Hz wire-in combination smoke and carbon monoxide alarm with battery backup.

Spread Spectrum Horn Tone

Features a lower, varying frequency horn tone for better audibility for the elderly.

Latching and Silence Features

Includes alarm latch, low battery latch, and temporary silence options for alarms.

OptiPath 360 Technology

Patented technology providing 360° direct access to the smoke sensor.

Technical Specifications and Compliance

Key Technical Specifications

Details alarm dimensions, weight, operating voltage, current, temperature, and humidity ranges.

Alarm Functions and Indicators

Describes audio alarm, test/silence, alarm reset, and visual indicator lights.

Interconnection and Standards Compliance

Specifies interconnection limits, wiring requirements, and compliance with safety standards.

Installation and Wiring

Installation Compliance and Requirements

Installation must conform to local codes, NEC Article 760, and NFPA 72 standards.

Wiring and Mounting Details

Covers quick-connect wiring, standard electrical box mounting, and locking mechanisms.

The BRK Cat. No. SC7010B is a wire-in, 120V AC 60Hz single and/or multiple station combination smoke and carbon monoxide alarm designed for residential and institutional applications, including sleeping rooms of hospitals, hotels, motels, dormitories, and other multi-family dwellings as defined in standard NFPA 101. This model complies with UL217 and UL2034, CSFM, NFPA 72 and NFPA 720, HUD, FHA, and other agencies that model their codes after these agencies. It meets building codes where AC/DC photoelectric smoke and carbon monoxide alarms are required.

The SC7010B is a state-of-the-art hardwired alarm with battery backup, featuring a photoelectric smoke sensing chamber and an electrochemical CO sensor. The alarm is interconnectable with up to 18 devices, of which 12 can be smoke alarms. The unit mounts to any standard electrical box up to 4" in size. Keyhole slots in the mounting bracket eliminate the need to remove electrical box screws for installation. It includes Perfect Mount, a mounting bracket that keeps the alarm secure over a wide rotation range to allow for perfect alignment. A dust cover is included to keep the alarm clean during construction. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness, making installation quick, easy, and cost-effective.

Function Description:

The SC7010B is a combination smoke and carbon monoxide alarm. It utilizes a photoelectric sensing chamber for smoke detection and an electrochemical sensor for carbon monoxide detection. The alarm is designed to detect both threats and alert occupants with an audible horn and visual indicators. It is capable of interconnecting with other compatible alarms to provide a synchronized alert throughout a dwelling.

Important Technical Specifications:

Alarm Dimensions: 5.0" diameter x 2" height
Weight: 9.3 oz.
Operating Voltage: 120V AC, 60Hz with two 1.5V Alkaline AA battery backup.
Operating Current: .05 amps (standby/alarm)
Temperature Range: 40°F (4°C) to 100°F (38°C)
Humidity Range: 10% to 95% relative humidity (RH)
Audio Alarm: 85dB at 10 feet
Smoke Sensor: Photoelectric
CO Sensor: Electrochemical
Interconnections: Up to 18 units with smoke, heat, CO alarms, and relays. A maximum of 12 smoke alarms are allowed.
Power Indicator (AC Power): Constant Green Light
Power Indicator (DC Power): Intermittent Green Light
Local Alarm Indicator: Rapidly flashing red light by corresponding indicator light during an audio alarm.
Remote Alarm Indicator: Red light not flashing during an audio alarm.
Latching Alarm Indicator: Audio off and corresponding red lights flashing 2 seconds on, 2 seconds off after local alarm, unless reset by test/silence button.
Low Battery Latch: "Power" LED flashes green on for 2 seconds, off for 2 seconds.

Usage Features:

Spread Spectrum Horn Tone: This alarm features a lower and varying frequency horn tone, making it easier for the elderly with normal age-related hearing loss to hear the alarm. The horn is rated at 85dB at 10 feet.
Two Latching Features:
- Alarm Latch: Easily identifies the initiating alarm even after the alarm condition has subsided by displaying a blinking red light via the corresponding alarm indicators.
- Low Battery Latch: Visually identifies which unit is in a low battery condition by blinking the green power light.
Two Silence Features:
- Alarm Silence: Temporarily silences nuisance alarms for several minutes.
- Low Battery Silence: Temporarily silences the low battery chirp for up to eight hours.
Single Button Test/Silence: A single button allows users to test all alarm functions by simulating smoke or CO conditions, causing the unit to alarm. This button also serves to silence nuisance alarms or the low battery chirp.
OptiPath 360 Technology: This exclusive patented technology provides 360° of direct access to the smoke sensor, enhancing detection capabilities.
Visual LED Indicators: A green LED indicates AC power, while a red LED indicates when the unit has switched to battery backup.
Self-Restoring: The unit is capable of self-restoring once the alarm condition has cleared.
Fully Screened Smoke Sensing Chamber: Prevents entry of small insects, reducing the probability of unwanted alarms.
Battery Backup: Powered by 120V AC, 60Hz, with a monitored battery backup using two 1.5V Alkaline AA batteries, ensuring continued operation during power outages.

Maintenance Features:

Easy Access Battery Drawer: Batteries can be installed and removed while the unit is mounted to the ceiling or wall.
Dust Cover: Included to keep the alarm clean during construction, minimizing false alarms and prolonging sensor life.
Locking Mechanisms: Two locking features are provided to prevent battery theft and/or theft of the unit itself.
Alarm Reset: The alarm automatically resets once smoke and/or carbon monoxide conditions clear.
Low Battery Chirp Silence: The low battery chirp can be temporarily silenced for up to eight hours, providing convenience during maintenance or battery replacement.

Installation:

Installation of this smoke and carbon monoxide alarm must conform to all local electrical codes and Article 760 of the National Electrical Code (NFPA 70) and NFPA 72. Interconnected units must meet specific requirements: the total length of wire interconnecting units should be less than 1000 feet, be #18 gauge or larger, and be rated at least 300V. It is recommended that all units be on the same fuse or circuit breaker. If local codes do not permit, ensure the neutral wire is common to both phases. Only BRK® user's manual catalog numbers listed in the user's manual may be connected to these smoke alarms.