Indications
Status
Flashes quickly
(5 times/sec)
Flashes intermittently
Flashes slowly then off
Flashes slowly
continuously
ON/OFF
• Reset for AP Setup
Indication
Device is in Smart Setup mode
(waiting to be added).
Device is in AP Setup mode
(waiting to be added).
Device is being set up and added to
network
Device is failed to connect to network
or disconnected from network
Device is switched ON/OFF
When the device is in any conditions, press and hold the power (reset)
button for 5s until the LED indicator flashes intermittently.
DO NOT hold longer than IOS, otherwise it will go to Smart Setup mode.
• Reset for Smart Setup
When the device is in any conditions, press and hold the power (reset)
button for 10s until the LEDindicator flashes quickly.
To Next Page
Loading...
