BM818Operation Manual 8/34
1) The Construct of Hardware Environment
How put in or out SIM/USIM card
How to link module
How to link main antenna
How to link diversity antenna
How to link USB cable
How to power on
How to power off
2) The Construct of Software Environment
How to install driver
How to upgrade firmware
3.1．The Construct of Hardware Environment
3.1.1. How put in or out SIM/USIM card
Need a SIM/USIM Card havebalance.
The step for put in SIM/USIM:
1) Put EVB upwards, hold the yellow button, and pull out the
SIM Card slot. See Picture 1 and 2.
To Next Page