OceSuite® Wireless DECT
Module Quick Reference Guide
Welcome to OceSuite®. This guide will help you set up and
start using your OceSuite® wireless DECT handset and/or
headset with your OceSuite® phone.
For an easy “how-to” video, point your browser to:
http://www.broadviewnet.com/getting-started.
PAIRING THE CORDLESS HANDSET/HEADSET
WITH THE PHONE
1. Place the handset in the charging base and/or place the
headset in the charging cradle. The LED blinks green when
charging and is steady green when fully charged. A full
charge may take up to 3 hours. A new, fully charged battery
will have a talk-time of 8 hours.
2. Ensure the handset/headset is at least partially charged
before attempting to pair the device(s) with the phone.
3. To pair the handset/headset to the phone, press and hold
the pairing button on the back of the Cordless Accessories
Module for 5 seconds to activate telephone pairing mode.
The blue LED on the module blinks and the phone display
prompts you to press the pairing button on the cordless
device.
4. To pair the handset to the phone, perform step 3, then press
and hold the hookswitch until the blue LED on the handset
blinks. The screen on the phone will prompt you if you want
to pair this device. Press “Yes”. Press “Close”.
5. To pair the headset to the phone, perform step 3, then press
and hold the silver, crescent-shaped hookswitch at the top
of the headset until the blue LED on the headset blinks. The
screen on the phone will prompt you if you want to pair this
device. Press “Yes”. Press “Close”.
USING THE WIRELESS DECT
HANDSET/HEADSET
1. Login to the phone with your OceSuite® extension and PIN.
Charge your device(s).
2. The range is 300 feet, but limited by factors such as battery
charge, interference from other electronic devices, oce
layout, and building construction. For best results, use only
within your oce or adjacent oces.
3. Density of DECT 6.0 devices permits 1 active device per 40
square feet.
To Next Page
Need help?
General