Need help?Do you have a question about the broag Remeha Gas 350 and is the answer not in the manual?
Provides detailed physical dimensions for various boiler configurations.
Lists key technical specifications including heat output, gas consumption, and water resistance.
Discusses requirements for the Low Pressure Hot Water system.
Provides guidelines for water treatment to prevent corrosion and scale.
Lists mandatory regulations and standards for boiler installation.
Shows recommended layout and measurements for a single boiler installation.
Shows recommended layout and measurements for a two-boiler installation.
Explains the conversion process and requirements for propane operation.
Provides the main electrical principle diagram.
Step-by-step guide for commissioning the boiler, including checks and adjustments.
Details routine annual servicing procedures for the boiler.
Explains control box flash codes for status and errors.
Lists common faults and their possible causes.
To Next Page
General