PRODUCT FEATURES
• Channels are selectable to allow more than one door chime set in same
building.
• Sounds different tunes for front, second, and third doors.
• Accessory buttons available for second and third doors.
Wireless Door Chime
Model RC520
INSTALLATION
1. Open the chime button case by in-
serting a flat blade screwdriver into
the notch on the bottom and push
to open. Lift the front of the button
up and away from the back.
2. Insert the A23 bat-
tery into the button.
The + side of the
battery goes up.
3. Insert (3)”AA” bat-
teries into chime re-
ceiver. Test opera-
tion by pressing
button.
If chime doesn’t operate, see trouble-
shooting section.
Before mounting the button outside,
hold it where you wish it to be and test
the operation. If it works, mount it there.
If it doesn’t work, see the troubleshoot-
ing section. If mounting to a metallic or
concrete surface, use a 1/8” to 1/4”
wood spacer between the back of the
button and the surface to increase the
range.
Wireless chime range can vary from 20
to 125 feet depending on the construc-
tion of the building. Wood or vinyl sid-
ing are ideal. Steel, aluminum, brick or
stucco decrease the range.
Regulatory Information
The user is cautioned that changes or modifications not expressly approved
by the party responsible for regulatory compliance could void the user's
authority to operate this equipment.
QUICK START
1. Insert battery into button.
2. Insert (3)”AA” batteries (sold separately) into chime receiver.
3. Place Chime where you would like it.
4. Hold button where you would like to mount it. Push button and if chime works,
mount button. If not, read details that follow.
Chime
Button
+
To Next Page
Need help?
General
