EasyManua.ls Logo

Brodie 9900 Series - User Manual

Brodie 9900 Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Brodie Meter Co., LLC
19267 Highway 301 North (30461)
PO Box 450
Statesboro, GA 30459-0450
Phone: (912) 489-0200
Fax: (912) 489-0294
www.brodiemeter.com
Manufacturers of BiRotors, Oval Gear Meters, and Control Valves
X-9900
Revision 03
Model 9900 Series Oval Gear Meter
with Smart Meter Manager
Installation and Operation Manual
Question and Answer IconNeed help?

Do you have a question about the Brodie 9900 Series and is the answer not in the manual?

Summary

Essential Instructions

Notice

Warranty

1.0 Oval Flowmeter Series 9900

1.1 Description

Overview of the 9900 Series Oval Flowmeter/Transmitter and its Smart Meter Manager (SMM).

Brodie Smart Meter Manager Technology

Details the advanced features and capabilities of the Smart Meter Manager (SMM) technology.

1.2 Design Features - Oval Flowmeter

Highlights the key design features of the 9900 Series Oval Flowmeter.

1.3 Principle of Operation - Oval Flowmeter

Explains how the Oval Flowmeter measures liquid flow using rotating oval gears.

1.4 Specifications - Oval Flowmeter

Lists specifications for Viscosity, Materials of Construction, Capacities, and Performance.

1.5 Specifications - Smart Meter Manager

Details technical specifications for the Smart Meter Manager module, including ratings, signals, and limits.

2.0 Installation

2.1 Receipt of Equipment

Provides instructions for checking the equipment upon receipt for shipping damage.

2.2 Recommended Storage Practice

Outlines recommended practices for storing the equipment to maintain its condition.

2.3 Return Shipment

Details the process and information required for returning equipment to the factory.

2.4 Installation - Mechanical

Guides on the mechanical installation steps, including piping alignment and flange tightening.

2.5 Electrostatic Discharge Protection

Explains the sensitivity of electronic components to static electricity and necessary precautions.

2.6 Installation - Electrical

Covers the electrical installation of the Smart Meter Manager, including wiring and power supply considerations.

Pulse (Frequency) Outputs

Describes the SMM's pulse output capabilities and connection methods.

RTD Inputs

Explains how to install and connect RTD sensors for process temperature input.

Alarm Outputs

Details how to configure and connect open collector alarm outputs.

3.0 Operation

3.1 Pre-Start Check

Guides users through pre-start checks of the SMM and its programmed variables.

3.2 Start-up and Operation of Flowmeter

Explains how to start up and operate the 9900 Oval flowmeter, including K-factor and output settings.

3.3 HART Communicator Operation

Covers operation, programming, and configuration using the HART communicator interface.

4.0 Maintenance

4.1 General Maintenance

Provides general maintenance recommendations, including strainer checks and handling precautions.

4.2 Disassembly and Assembly Procedures

Details the procedure for disassembling and assembling the meter, including crucial safety warnings.

4.3 Smart Meter Manager Removal

Guides on how to remove the Smart Meter Manager from the UMB housing.

4.4 Pickoff Removal;Installation

Provides instructions for removing and installing the pickoff component.

4.5 Monitoring SMM Electronics and Alarms

Explains how the SMM monitors its internal health and the types of diagnostic alarms.

Brodie 9900 Series Specifications

General IconGeneral
BrandBrodie
Model9900 Series
CategoryIndustrial Equipment
LanguageEnglish