EasyManua.ls Logo

Broil King SIGNET Series - User Manual

Broil King SIGNET Series
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR GAS
GRILL.
RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
FOR ASSEMBLY INSTRUCTION, PLEASE SEE YOUR ASSEMBLY MANUAL
OR VISIT www.omcbbq.com TO VIEW OUR ASSEMBLY
VIDEOS.
EN
20094-40LP REV L 03/18
1-800-265-2150
info@omcbbq.com
PLEASE RECORD YOUR MODEL
NUMBER, SERIAL NUMBER AND DATE
OF PURCHASE HERE.
This information can be found on the black and silver OMC caution
sticker on the back or side of your gas grill.
Model Number
-
Serial Number
-
Date of Purchase / /
dd mm yyyy
FOR USE WITH L.P. (LIQUID PETROLEUM GAS)
IN CANADA, PROPANE GAS
ANSI Z21.58-2018 / CSA 1.6-2018
CONTENTS
SAFETY .............................................................................. 2
INSTALLATION .................................................................. 2
L.P. GAS CYLINDER ......................................................... 3
OPD EQUIPPED CYLINDER ............................................. 4
HOSE AND REGULATOR ................................................. 4
LEAK TESTING.................................................................. 5
VENTURI TUBES ............................................................... 5
LIGHTING ........................................................................... 6
OPERATION ....................................................................... 7
COOKING TECHNIQUES ...................................................... 7
MAINTENANCE ................................................................. 10
TROUBLESHOOTING ....................................................... 11
WARRANTY ....................................................................... 12
GUIDE DU PROPRIÉTAIRE DE BARBECUE AU
GAZ
..... 13
MANUAL DEL USUARIO DE PARRILLA A GAS
............. 25
NOTE TO INSTALLER: THESE INSTRUCTIONS MUST BE
LEFT WITH THE CONSUMER.
DANGER
IF YOU SMELL GAS:
1. SHUT OFF GAS TO THE APPLIANCE
2. EXTINGUISH ANY OPEN FLAME
3. OPEN LID
4. IF ODOR CONTINUES, KEEP AWAY FROM
THE APPLIANCE AND IMMEDIATELY
CALL YOUR GAS SUPPLIER OR YOUR
FIRE DEPARTMENT
WARNING
1. DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE LIQUIDS OR
VAPORS
IN THE VICINITY OF
THIS APPLIANCE
2. AN LP CYLINDER NOT CONNECTED FOR
USE SHALL NOT BE STORED IN THE
VICINITY OF THIS OR ANY OTHER
APPLIANCE

Table of Contents

Questions and Answers

  • R
    rmunozAug 20, 2025
    Why does my Broil King Grill have a flickering burner flame or low temperatures on HIGH setting?
    • M
      Michelle BeckAug 20, 2025
      A flickering burner flame or low temperatures on the HIGH setting often indicates that the excess flow safety device has been activated in the connection between the cylinder and the barbecue. To resolve this, turn off the LP cylinder valve and set all burners to the OFF position. Disconnect the regulator from the cylinder, wait two minutes, and then re-attach the regulator to the cylinder. Open the cylinder valve slowly and wait one minute before lighting the grill.
  • T
    Thomas PeckAug 22, 2025
    What to do if I smell gas with my Broil King SIGNET?
    • A
      Anthony ArmstrongAug 23, 2025
      Immediately shut off the LP cylinder valve. Do not use the appliance until the leak is sealed.
  • K
    Kathleen CowanAug 26, 2025
    How to fix yellow flame on my Broil King SIGNET Grill?
    • J
      Jose AllenAug 26, 2025
      Some yellow flame is normal. However, if it is excessive, the venturi may be blocked, or the burner ports may be blocked. Remove the burner and clean the venturi. Also, remove the burner and clean it with a soft bristle brush (e.g., a toothbrush).
  • S
    Sean TurnerAug 27, 2025
    Why are there “flare-ups” or grease fires in my Broil King SIGNET?
    • T
      toddhooverAug 27, 2025
      Flare-ups or grease fires occur due to excessive grease buildup on the vaporizer or inside the grill's cook box, or because of excessive heat. To resolve this, thoroughly scrape off the Flav-R-Wave and the inside of the cookbox, then vacuum out any debris. Additionally, lower the burner control settings to reduce the heat.
  • A
    Anthony HenryAug 30, 2025
    How to fix decreasing heat and popping sound in Broil King SIGNET?
    • K
      Kristi NicholsonAug 30, 2025
      Decreasing heat and a popping sound may be due to an empty LP gas cylinder or a blocked venturi. Refill the LP gas cylinder. If that doesn't solve the issue, remove the burner and clean the venturi.
  • S
    Shannon GonzalesSep 1, 2025
    What to do if the control panel or oven lights on my Broil King SIGNET are not working?
    • S
      Selena JonesSep 2, 2025
      If the control panel or oven lights are not working, first, ensure the unit is connected to a working power outlet with a GFI power cord. Second, check that the transformer output is 12Vac and replace it if needed. Third, clean the connections and ensure all connectors are pushed together firmly. Fourth, replace the bulbs.
  • T
    Tony HartSep 4, 2025
    How to fix regulator humming noise in my Broil King Grill?
    • B
      buchananpatrickSep 4, 2025
      A humming noise from the regulator usually means the cylinder valve was opened too quickly. Open the cylinder valve slowly to resolve this.
  • S
    Sherry BuchananSep 7, 2025
    How to fix flames beneath the control panel (flashback fire) in my Broil King Grill?
    • M
      Michelle WaltersSep 7, 2025
      If you see flames beneath the control panel, which indicates a flashback fire, it's likely that the venturi is blocked. Remove the burner and clean the venturi to resolve this issue.
  • G
    Glenda JohnsonSep 9, 2025
    What to do if I detect a leak at the cylinder, regulator, or other connection on my Broil King Grill?
    • J
      Jordan ElliottSep 9, 2025
      If you detect a leak at the cylinder, regulator, or any other connection, it could be due to a loose regulator fitting or a gas leak in the hose, regulator, or control valves. First, try tightening the fitting and then perform a “Leak Test.” If the problem persists, contact an authorized service center.
  • C
    Chris HarrisSep 12, 2025
    How to fix ignitor not working on Broil King Grill?
    • D
      David SmithSep 12, 2025
      If the ignitor is not working, it could be due to a dead ignitor battery, disconnected ignitor wires, a misaligned electrode on the burner, or an ignitor malfunction. Replace the battery. Ensure the main burner and side burner electrode wires are all connected. Realign the electrode and clear any surrounding debris from the area. If none of these steps work, use the match lighting procedure.

Summary

Safety Precautions

LP Gas Cylinder

QCC-1 Quick Closing Coupling

Details of the QCC-1 quick closing coupling system and its safety features.

Operation

How to safely connect and operate the gas grill with an LP cylinder.

Hose and Regulator

Connection Procedure

Step-by-step instructions for connecting the hose and regulator to the cylinder.

Leak Testing

Safety Precautions

Important safety rules to follow before and during leak testing.

Testing Procedure

Detailed steps for performing a leak test on gas connections.

Venturi Tubes

Inspection and Cleaning

Instructions for inspecting and cleaning venturi tubes to prevent flashback fires.

Lighting Instructions

Lighting the Main Burner

Step-by-step guide for lighting the main burners.

Maintenance Guide

Regular Maintenance

Routine cleaning and inspection of cooking grids, grease tray, and Flav-R-Wave.

Troubleshooting

Smell of Gas

Diagnosing and resolving issues related to gas smells.

Burner Not Lighting

Broil King SIGNET Series Specifications

General IconGeneral
Grate MaterialCast iron
Fuel TypePropane
Burner MaterialStainless steel
ConstructionStainless steel
MaterialStainless Steel

Related product manuals