FOR INSTALLER - BEFORE YOU START
To install and operate the Bromic Smart-Heat Control you MUST have access to the following:
• An app-enabled smart device with internet connectivity.
(Minimum Requirements: Bluetooth 4.2, Android 8.1, iOS 14.3 or greater)
• The Bromic Smart-Heat App, available for download on the Apple App Store and Google
Play Store using the QR codes below.
• A Bromic Smart-Heat account or access to email for registration.
• The name and email address of the primary user.
• [Wi-Fi only] The SSID and password of a local Wi-Fi network operating on 2.4GHz.
For installation instructions (mounting instructions, mounting orientation, and electrical wiring), refer
to manual.
DIFFERENCES BETWEEN BLUETOOTH AND WI-FI COMMUNICATION
BLUETOOTH Communication WI-FI Communication
• Controller mounting location must be within
10m (30ft) of the heating location(s).
• Only 1 smart device may be used at a time.
• During operation, the smart device must be
within 10m (30ft) of the controller.
• Enables you to control heaters individually
and use the timer o function.
• Controller mounting location must be
within 10m (30ft) of a router (or smart
device indicates 3 bars of Wi-Fi at the
mounting location).
• Enables multiple users simultaneously.
• Enables o-site control.
• Enables additional features (Zoning/
grouping and Scene automation).
Heater
Heating
Area
Controller
Smart Device
Wi-Fi Router
Wi-Fi installation must be
within 10m (30ft) of router
(or 3 bars signal strength)
Bluetooth Control Wi-Fi Control
Controller must be within 10m
(30ft) of heating area for
Bluetooth control
OR
Cloud
Play Store
App Store
AU/UK/US_REV 23
SCAN FOR
LATEST MANUAL
To Next Page
Need help?
General
