Brompton B75 - Handlebar Setup; Saddle Adjustment; Front Wheel Attachment

MFHC
7. FRONT WHEEL
Place your right hand on the saddle and grasp the handlebar support with your left hand, near the hinge.
Lift the handlebar support with your left hand, to unhook the front wheel from the rest of the bike.
Swing your left hand forward, pushing the front wheel forward (fig. 5, 6) until the hinge is closed.
5. HANDLEBAR
Push firmly down on the handlebar to release it from
the frame (fig. 4), then swing it upward into place.
Firmly tighten the hinge clamp.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
6. SADDLE
Open seat clamp lever, raise seat,
close seat clamp lever (fig. 4).