Broncolor RFS 2 User Manual

2
1 Case
2 lithium button cell
Li-Mn CR2450 (560 mAh, 3 V)
3 Display
4 USB socket
5 Sync in
6 Sync out
7 "test" key
8 Base plate (only with receiver kit)
9 "set" key (to set lamp channel and studio channel)
10 Keys "
", "" (to regulate the flash energy and for
adjustment of the lamp channel and studio address)
11 Sync cable for flash unit mini to mini (only with receiver kit)
12 Sync cable for camera
SCOPE OF DELIVERY
3
4
5
6
7 8
9
10
11
12
1
2

Broncolor RFS 2 Specifications

General

Type	Transmitter
Compatibility	Broncolor flash units
Frequency	2.4 GHz
Range	Studio: 50 m (164 ft) Outdoor: 200 m (656 ft)
Power Supply	2 x AA batteries
Groups	4

Summary

Scope of Delivery

Broncolor Radio Frequency System 2.1

Before Use

Provides essential information regarding the use, safety, and maintenance of the device.

1. Operation as Transmitter or Receiver

2. Radio Frequency System 2.1 (RFS 2.1)

2.1 RFS 2 Transceiver as Transmitter

Explains how the RFS 2.1 transceiver functions as a transmitter to control broncolor units.

2.2 RFS 2.1 Transceiver as Receiver

Details how to use the RFS 2.1 as an external receiver for broncolor units.

2.3 Operation

Explains the operation of the device's keys and the effect of different key press durations.

3. Set Studio Address

4. Setting the Lamp Channel

5. Energy Control

Mode "LP"

Details how to adjust the output of individual lamp channels using the 'LP' mode.

Resetting the Device

Procedure to reset the device to factory settings using specific key combinations.

6. Compatibility

Transceiver Technical Data