Need help?Do you have a question about the brondell FreshSpa easy bidet and is the answer not in the manual?
Verify water supply line compatibility and check for rigid pipes requiring replacement.
Steps to turn off the water supply valve and flush the toilet to empty the tank.
Procedure for disconnecting the existing water supply hose from the fill valve.
Installing the T-valve under the toilet tank and connecting the cold water supply line.
Connecting one end of the bidet hose to the T-valve's open side.
Attaching the bidet unit to the toilet using washers, brackets, and original seat hardware.
Connecting the other end of the bidet hose to the bidet attachment.
Opening the water supply slowly and checking all connections for leaks.
Instructions for operating the control dial for nozzle cleaning and wash functions.
Details on adjusting the bidet nozzle to three different positions for optimal spray.
Guide on cleaning the nozzle using a toothbrush, mild detergent, or toothpick.
General| Type | Bidet Attachment |
|---|---|
| Material | Plastic |
| Water Temperature | Cold Water Only |
| Color | White |
| Spray Type | Adjustable Spray |
| Water Supply | Connects to existing toilet water line |
| Water Pressure Control | Adjustable |
| Compatibility | Fits most two-piece toilets |
| Installation | DIY, No Plumbing Required |
To Next Page