Need help?Do you have a question about the brondell RC100 and is the answer not in the manual?
Highlights the system's intelligent valve and reservoir for reduced wastewater.
Explains the automatic flushing mechanism for extending RO membrane life.
Describes the faucet's LED indicator for timely filter replacement.
Notes the unit's compact design with integrated tank for minimal space usage.
Details the four-stage filtration process for clean, healthy water.
Emphasizes the system's efficient design delivering constant flow without pumps.
Explains the tool-free, easy twist-and-seal filter replacement system.
Removes particulate materials like sand and rust as a pre-filter.
Reduces harmful VOCs and chlorine that can damage the RO membrane.
Separates H2O from contaminants using a semi-permeable membrane.
Reduces lingering contaminants like chlorine, improving taste and odor.
Detailed steps for installing the filtered water faucet, including hole preparation.
Instructions for connecting the T-valve to the cold water supply line.
Guide on how to connect and disconnect tubes using quick connectors.
Procedure for drilling the drain pipe and installing the drain clamp.
Final connection steps and initial water turn-on and leak check.
Procedure for purging air and flushing the new filters and system.
Importance of filter replacement for system performance and ordering replacement filters.
Explanation of the LED indicator function and when to change filters.
Table outlining recommended replacement intervals for each filter type.
Step-by-step guide on how to physically replace the filters in the unit.
Information on arsenic in water and the system's effectiveness against pentavalent arsenic.
Details specific conditions and situations not covered by the product warranty.
Instructions on how to contact Brondell for warranty service and obtain an RMA.
General| Brand | brondell |
|---|---|
| Model | RC100 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
