BRONDI FX -318 User Manual

1
FX -318 Instruction Manual - English
1. LCD Screen
Channel Number. Changes from 1 to
8 as selected by the user.
CTCSS Code. Changes from 1 to 38
as selected by the user.
Displays the Battery change level.
When the bars are reduced, the
battery needs recharging.
Displayed when the stop watch function is activated.
TX Displayed when transmitting a signal.
RX Displayed when receiving a signal.
DCM Displayed when the Dual Watch function is turned On.
DCS Displayed when the Digital Code System is turned On.
VOX Displayed when the VOX feature is enabled.
SC Displays when the PMR is scanning all channels.
Displayed when the Key Lock feature is activated.
Displays the current Speaker volume level.
Displays when the call signal is On.
Antenna
LCD Screen
- Displays the
current channel
selection and other
radio s
y
mbols.
PTT (PUSH to
TALK) button
–Press and hold to
transmit.
CALL button
-Press to send
Ringing tone to
other PMR units.
MENU button
-Press to change
To switch between
Modes.
S
p
eake
r
Ear/Mic/Charge
j
ack
PWR(POWER)
button – Press
and hold to turn
the unit ON or
OFF.
MIC
(
Micro
p
hone
)
UP/DOWN
buttons –
Press to change
channels, volume,
and to select
settings during
p
ro
g
rammin
g
.
FX-318

BRONDI FX -318 Specifications

General

Brand	BRONDI
Model	FX -318
Category	Two-Way Radio
Language	English

Summary

Radio Components and LCD Display

FX-318 Radio Component Identification

Identifies key external parts of the FX-318 radio, including antenna, buttons, and jacks.

FX-318 LCD Screen Symbol Meanings

Explains the meaning of various symbols and icons displayed on the radio's LCD screen.

FX-318 Installation and Battery Management

FX-318 Belt Clip Installation Guide

Instructions for removing and attaching the belt clip to the radio unit.

FX-318 Battery Installation and Charging

Steps for inserting batteries and connecting the charger for power.

FX-318 Basic Operation and Safety

FX-318 Transmitting Range and Safety Precautions

Details the radio's communication range and critical safety precautions.

FX-318 Powering On/Off and Volume Adjustment

Procedures for turning the radio on/off and adjusting the speaker volume.

FX-318 Channel and Code Configuration

FX-318 Channel Selection Guide

Guide to selecting one of the 8 available communication channels.

FX-318 CTCSS and DCS Code Setup

How to configure CTCSS sub-channels and DCS digital codes for private communication.

FX-318 Advanced Operation Features

FX-318 Transmission, Reception, and VOX Settings

Explains transmission, reception, and voice-activated (VOX) sensitivity settings.

FX-318 Auto Channel Scan and Call Tones

Instructions for activating auto channel scan and sending call-ring tones.

FX-318 Additional Features and Modes

FX-318 Call Tone Selection and Key Tone Settings

How to select call tones and manage key press confirmation tones.

FX-318 Dual Watch, Key Lock, and Stopwatch

Configuration for dual watch, button lock, and using the stopwatch function.

FX-318 Specifications and Device Details

FX-318 LCD Backlight and Jacks Information

Information on the LCD screen backlight and available connection jacks.

FX-318 Technical Specifications

Technical details including channels, CTCSS, power output, and frequency table.