Do you have a question about the BRONDI FX-4 Twin and is the answer not in the manual?
Displays the selected channel from 1 to 8.
Shows the current battery charge status.
Indicates the current speaker volume level.
Shows when the unit is transmitting a signal.
Shows when the unit is receiving a signal.
Blinks when the Scan feature is active.
Instructions for detaching the belt clip from the unit.
Steps to attach the belt clip securely to the unit.
Guide for inserting batteries with correct polarity.
How to power the two-way radio on and off using the power button.
Automatic low power mode to extend battery life when idle.
Displays the PMR's battery charge levels.
Do not use any PMR with a damaged antenna; it may cause minor burns.
Handle batteries carefully to avoid short circuits and property damage.
Do not place PMR in air bag deployment areas to prevent injury from inflation.
Turn PMR OFF in potentially explosive atmospheres to prevent sparks causing explosion.
Turn PMR OFF near electrical blasting caps or posted blasting areas.