To Next Page

To Previous Page

1-2

Installation and Operation Manual

X-VA-MT3809G-MT3810G-eng

Part Number: 541B182AAG

December, 2014Models MT3809G & MT3810G

Section 1 Introduction

Table 1-1 Specifications Meter

MT3809MT3809

MT3809

MT3809 ELFMT3809 ELF

MT3809 ELF

TFE LinedTFE Lined

TFE Lined

MT3810MT3810

MT3810

SpecificationsSpecifications

Specifications

Measuring RangeMeasuring Range

Measuring Range See Capacity Tables 1-2A and 1-2B

RangeabilityRangeability

Rangeability 10:1 (most sizes)

Metering TubeMetering Tube

Metering Tube 316/316L (dual certified stainless steel) 316/316L 316/316L

(dual certified stainless steel) (dual certified stainless steel)

Alloy 625, Hastelloy C, Monel K-500, w/Tefzel Lining

Titanium Gr. II Hastelloy C

Flanges and End FittingsFlanges and End Fittings

Flanges and End Fittings 316/316L (dual certified stainless steel) 316/316L 316/316L

(dual certified stainless steel) (dual certified stainless steel)

Alloy 625, Hastelloy C, Titanium Gr. II w/Tefzel Lining

AccuracyAccuracy

Accuracy 2%, 1%, 5%, 3%, 2%, 5%,

VDI/VDE class 1.6 VDI/VDE class 4, 2.5 VDI/VDE class 1.6 VDI/VDE class 6

RepeatabilityRepeatability

Repeatability 0.25% Full Scale 1% Full Scale 0.25% Full Scale 0.25% Full Scale

ScaleScale

Scale Black increments with white background - Plastic Material

Silver increments with black background - Aluminum Material

ConnectionsConnections

Connections Weldneck flanges to ANSI B16.5, Flanges to ANSI Weldneck flanges to ANSI

DIN 2527/2635 B16.5, DIN 2527/2635 B16.5, DIN 2527/2635

1/2” to 2”NPT/Rc-Female 1/2” NPT/Rc-Female 1/2” to 2” NPT-Female

1” to 2-1/2” NPT-Male 1” NPT-Male

Flange RatingFlange Rating

Flange Rating ANSI 1/2” to 4” ANSI 1/2” to 1” ANSI 1/2” to 2” ANSI 1/2” to 2”

150# RF to 600# RF 150# RF to 600# RF 150# RF to 300# RF 150# RF to 300# RF

DIN PN 40 DIN PN40

Standard Flange FinishStandard Flange Finish

Standard Flange Finish 3.2 - 6.3 Ra

FloatsFloats

Floats 316L stainless steel 316L stainless steel/Titanium Hastelloy C-276 (sizes 7,8) 316L stainless steel

Alloy 625, Hastelloy C Monel K-500, PVDF (sizes 10-13)

Titanium Gr. II Hastelloy C

O-ringsO-rings

O-rings Viton Kalrez 4079 None Viton

Teflon Kalrez 3018 None Teflon

Protection CategoryProtection Category

Protection Category IP67 / NEMA 4X

Indicator Housing & CoverIndicator Housing & Cover

Indicator

Housing & Cover Die cast Aluminum (Alloy 380), epoxy paint, glass window (general purpose)

*Die cast Aluminum (Alloy 380), epoxy paint, glass window (Intrinsic Safe)

Cast 316 stainless steel, glass window (general purpose)

Cast 316 stainless steel, 316 stainless steel hardware, glass window (flameproof)

Pressure/TemperaturePressure/Temperature

Pressure/Temperature See Pressure/Temperature Tables 1-3A, 1-3B, 1-3C and 1-4

Maximum Fluid TemperatureMaximum Fluid Temperature

Maximum Fluid Temperature 420°C/788°F (Refer to Table 1-4) 150°C/270°F 300°C/570°F

Meter DimensionsMeter Dimensions

Meter Dimensions Refer to Product Dimensions Figures 1-1, 1-2 and 1-3

Pressure Equipment DirectivePressure Equipment Directive

Pressure Equipment Directive Flowmeter complies under Sound Engineering Practices (SEP) or categories I, II, III

(PED) 97/23/EC(PED) 97/23/EC

(PED) 97/23/EC

Needle Control ValvesNeedle Control Valves

Needle Control Valves Sizes 7-12 Sizes 0-5 None Sizes 7-12

Flow ControllersFlow Controllers

Flow Controllers Sizes 7-8 Sizes 0-5 None Sizes 7 & 8

Inductive Alarm Switches *Inductive Alarm Switches *

Inductive Alarm Switches * 1 or 2 inductive switches (Relay power supply recommended)

TransmitterTransmitter

Transmitter 4-20 mA output with HART Rev. 7 communications

Transmitter and InductiveTransmitter and Inductive

Transmitter and Inductive 4-20 mA output with HART Rev. 7 communications and 1 or 2 inductive switches

Alarm Switches*Alarm Switches*

Alarm Switches* (Relay power supply recommended)

Transmitter, LCD DisplayTransmitter, LCD Display

Transmitter, LCD Display 4-20 mA output with HART Rev. 7 communications with digital display

and Inductive Switches*and Inductive Switches*

and Inductive Switches* plus 1 or 2 inductive switches (Relay power supply recommended)

Transmitter LCD DisplayTransmitter LCD Display

Transmitter LCD Display 4-20 mA output with HART Rev. 7 communications and pulse output

Pulse OutputPulse Output

Pulse Output plus digital display

General Purpose &General Purpose &

General Purpose &

Intrinsically Safe Power SuppliesIntrinsically Safe Power Supplies

Intrinsically Safe Power Supplies

24 Vdc, 110 Vac, 220 Vac

for Transmitterfor Transmitter

for Transmitter

Intrinsically Safe Power Supply/RelayIntrinsically Safe Power Supply/Relay

Intrinsically Safe Power Supply/Relay 24 Vdc, 110 Vac, 220 Vac

for Alarms - Recommended*for Alarms - Recommended*

for Alarms - Recommended*

Agency ApprovalsAgency Approvals

Agency Approvals Refer to Pages 1-10 to 1-13

Other Approvals*Other Approvals*

Other Approvals* SIL 2 Alarms

EMC ProtectionEMC Protection

EMC Protection The device complies with EU Directive 2004/108/EC,

FCC Part 15, subpart B, Industry Canada, 1 CES-003 Recommendations NE21/NE43

* Inductive Alarm or IS Housing does not apply to MT3809 ELF

Brand	Brooks Instrument
Model	MT3809G
Category	Measuring Instruments
Language	English

Brooks Instrument MT3809G User Manual

Table of Contents

Questions and Answers:

Brooks Instrument MT3809G Specifications

Related product manuals