EasyManua.ls Logo

Brooks EIB605 - End of Life and Alarm Replacement

Brooks EIB605
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In certain circumstances even with regular cleaning, contamination can build up in
the smoke sensing chamber causing the alarm to sound. If this happens the Smoke
Alarm must be returned for servicing or replacement. Contamination is beyond our
control, it is totally unpredictable and is considered normal wear and tear. For this
reason, contamination is not covered by the guarantee and a charge is made for
all such servicing work.
5.7 End of life
The entire Alarm must be replaced if:-
(i) All Models:
The unit is installed for over 10
years
(check the “replace by” date
marked
on
the
side of the unit).
(ii) All 10 Year Lithium Battery models only
The
Smoke
Alarm is giving a short
beep
about once a minute and the red light
flashes at the same time for longer than 1 hour. The Heat Alarm is giving a short
beep about once a minute for longer than 1 hour.
The Alarm fails to
sound
the horn loudly when the test button is
pressed.
Before the Alarm is safely discarded, remove from the mounting plate. With the 9V
Replaceable Battery models disconnect the battery.
Do not put the Alarm into a fire.
The Alarm should be disposed in a safe and environmentally sound manner at your
local recycle centre. Contact your local authority for further advise.
24
B17078-R0-Ei600 SERIE-BROOKS.indd 24 07/12/2010 11:11

Related product manuals