10
Foot Rolling Function Start/Stop Control Button
Press this button once to activate rhythmic rolling massage at soles, press this button again to stop rolling massage at soles.
Note: During Auto Program mode, pressing this button can also disable/enable the foot rolling function.
16. FOOT ROLLING
Lumbar Heat Function Start/Stop Control Button
Press this button to activate lumbar heat function, press this button again to stop the heat function.
Note: During Auto Program mode, pressing this button can also disable/enable the heat function.
17. HEAT
Press to turn on/off the seat vibration.
18. VIBRATION
Press to turn on/off the LED lighting
19. LED LIGHTING
With every press of this button, the manual massage technique will change in the sequence of kneading, swedish, tapping, shiatsu,
clapping, and rolling.
20. MANUAL MASSAGE FUNCTION
Press to change the massage direction during a kneading, swedish, tapping, shiatsu, or clapping massage.
21. MASSAGE DIRECTION
When you press this button the spot massage will turn on, press again to change to partial.
22. SPOT/PARTIAL
Here you can alter the strength of the massage during a kneading massage– there are 5 levels.
23. STRENGTH
Here you can alter the speed of the massage during a tapping, clapping, swedish, and shiatsu massage – there are 5 levels.
24. SPEED
Here you can alter the width from narrow to medium to wide for the tapping, clapping, shiatsu, and rolling massage techniques.
25. WIDTH
Each time this button is pressed, the manual air massage location will change in the sequence of calf & foot, arm, and shoulder.
26. Air Massage
Here you can alter the intensity the massage's air pressure massage - there are 5 levels.
27. AIR INTENSITY
To Next Page
Loading...
